Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Supported Devices

The following Xerox devices are compatible with the most current released version of Embedded Web.

Compatibility Requirements:

  • Extensible Interface Platform (EIP) version 2.5 and newer (exclusions apply)

  • Firmware supporting the minimum EIP version (see table below)

  • Xerox Cost Control Hardware Kit

  • 7 inch or larger touch screen

Xerox Cost Control Hardware Kit: A Network Accounting or Job Based Accounting (JBA) kit must be installed and activated on each Xerox device by the equipment provider

Prox Card Reader: If prox cards are used for authentication, an RF IDeas Keyboard Wedge pcProx® RDR-6081AKU reader must be purchased and installed on each Xerox device by the equipment provider

Configuring EIP: https://www.support.xerox.com/en-us/article/en/2121820

EIP Version

Devices Supported

Minimum Firmware for each EIP

4.3

AltaLink
C8130/35/45/55/70 Color Multifunction Printer
AltaLink
B8145/55/70 Multifunction Printer

114.xxx.xxx.xxxxx or greater is required

4.0

AltaLink
B8045, B8055, B8065, B8075, & B8090;
C8030, C8035, C8045, C8055, & C8070

N/A - supported on all versions of firmware

3.7

VersaLink
B400, B405, B600, B605, B610, & B615;
B7025, B7030, & B7035;
C400, C405, C415, C500, C505, C600, C605, C625;
C7000, C7020, C7025, & C7030

N/A - supported on all versions of firmware

3.5

WorkCentre
7830, 7835, 7845, 7855,
58xx Series,
7220 & 7225, 5945 & 5955, 6655, 3655X, 7970

073.xxx.075.34540

3.0

WorkCentre
7830, 7835, 7845, 7855,
58xx Series,
7220 & 7225, 5945 & 5955, 6655, 3655X, 7970

ColorQube
8700, 8900, 9301, 9302, & 9303

072.190.004.09101

2.5

WorkCentre
7830, 7835, 7845, 7855,
58xx Series,
7220 & 7225,
5945 & 5955, 6655, 3655X, 7970

ColorQube
8700, 8900, 9301, 9302, & 9303

071.190.102.34907

Devices NOT Supported

The following Xerox devices are not compatible with any released version of Embedded Web.

EIP Version

Devices Not Supported

3.7

PrimeLink C9065/C9070; PrimeLInk B9100 Series
Note: We have submitted to Xerox what is needed to be changed in order for our Embedded software to work with the PrimeLink series, and as of Q1 2023 have not heard anything back.

2.0

All devices running firmware with this version of EIP

1.5

All devices running firmware with this version of EIP

1.0

WorkCentre 3635; 232, 238, 245, 255, 265, & 275 (regular and Pro); 5222, 5225, & 5230; 6400; 7232 & 7242; 7328, 7335, & 7345; 7346; 7655, 7665, & 7675

  • No labels