Compatibility - Embedded Web: Xerox

Supported Devices

The following Xerox devices are compatible with the most current released version of Embedded Web.

Compatibility Requirements:

Xerox Cost Control Hardware Kit
7 inch or larger touch screen

Xerox Cost Control Hardware Kit: A Network Accounting or Job Based Accounting (JBA) kit must be installed and activated on each Xerox device by the equipment provider

Prox Card Reader: If prox cards are used for authentication, an RF IDeas Keyboard Wedge pcProx® RDR-6081AKU reader must be purchased and installed on each Xerox device by the equipment provider

Configuring EIP: https://www.support.xerox.com/en-us/article/en/2121820

Devices Supported	Minimum Firmware
AltaLink C8130/35/45/55/70 Color Multifunction Printer AltaLink B8145/55/70 Multifunction Printer	114.xxx.xxx.xxxxx or greater is required
AltaLink B8045, B8055, B8065, B8075, & B8090; C8030, C8035, C8045, C8055, & C8070	N/A - supported on all versions of firmware
VersaLink B400, B405, B600, B605, B610, & B615; B7025, B7030, & B7035; C400, C405, C415, C500, C505, C600, C605, C625; C7000, C7020, C7025, & C7030	N/A - supported on all versions of firmware
WorkCentre 7830, 7835, 7845, 7855, 58xx Series, 7220 & 7225, 5945 & 5955, 6655, 3655X, 7970	073.xxx.075.34540
WorkCentre 7830, 7835, 7845, 7855, 58xx Series, 7220 & 7225, 5945 & 5955, 6655, 3655X, 7970 ColorQube 8700, 8900, 9301, 9302, & 9303	072.190.004.09101
WorkCentre 7830, 7835, 7845, 7855, 58xx Series, 7220 & 7225, 5945 & 5955, 6655, 3655X, 7970 ColorQube 8700, 8900, 9301, 9302, & 9303	071.190.102.34907

Devices NOT Supported

The following Xerox devices are not compatible with any released version of Embedded Web.

EIP Version	Devices Not Supported
3.7	PrimeLink Series - ALL MODELS
2.0	All devices running firmware with this version of EIP
1.5	All devices running firmware with this version of EIP
1.0	WorkCentre 3635; 232, 238, 245, 255, 265, & 275 (regular and Pro); 5222, 5225, & 5230; 6400; 7232 & 7242; 7328, 7335, & 7345; 7346; 7655, 7665, & 7675