Compatibility - Xerox
Supported Devices
The following Xerox devices are compatible with the most current released version of our Embedded product.
Compatibility Requirements:
Xerox Cost Control Hardware Kit
A Network Accounting or Job Based Accounting (JBA) kit must be installed and activated on each Xerox device by the equipment provider7 inch or larger touch screen
Optional:
Prox Card Reader
If prox cards are used for authentication, an RF IDeas Keyboard Wedge pcProx® RDR-6081AKU reader must be purchased and installed on each Xerox device by the equipment provider
Configuring EIP: https://www.support.xerox.com/en-us/article/en/2121820
Devices Supported | Minimum Firmware |
---|---|
EC8036, EC8056 | Supported on all versions of firmware |
AltaLinks Versalink | 121.xxx.xxx.xxxxx or greater is required |
VersaLink B415, C415 | 120.xxx.xxx.xxxxx or greater is required |
AltaLink | 114.xxx.xxx.xxxxx or greater is required |
AltaLink | N/A - supported on all versions of firmware |
Devices NOT Supported
The following Xerox devices are not compatible or support has been deprecated.
Devices Not Supported |
---|
PrimeLink Series - All models C9065, C9070, B9100, B9110, B9125, B9136 |
VersaLink models that only support EIP 3.7 C405, C400, C500, C600, C505, C605, B400, B405, B600, B610, B605, B615, B7025, B7030, B7035, C7000, C7020, C7025, C7030, C7120, C7125, C7130, B7125, B7130, B7135, C8000, C9000 |
All models that only support EIP 1.0, 1.5, 2.0, 2.5, 3.0, 3.5
|